i have a AMD Ryzen 5 3600 6-Core Processor 3.59 GHz what setting should I use on OBS using CB? I used the setting that CB had their site and I keep having problems with dropped frames and bitrate.
Okey ,otherway: when you go to settings , output. where u choose presets and encoder, u can choose x264 or only Nvenc? If there is x264 too, then must be also in configurationI don't remember seeing the option to do nvenc or x264 in the test
Resolution (WxH) | Video Bitrate | Audio Bitrate | FPS |
---|---|---|---|
853x480 | 800 - 1200 kbps | 96 kbps | 24 - 30 |
1024x576 | 1200 - 3000 kbps | 96 kbps | 24 - 30 |
1280x720 | 3000 - 5000 kbps | 96 kbps | 24 - 30 |
1920x1080 | 5000 - 8000 kbps | 128 kbps | 24 - 30 |
2560x1440 | 8000 - 12000 kbps | 192 kbps | 24 - 30 |
3840x2160 | 12000 - 20000 kbps | 192 kbps | 24 - 30 |
Resolution | Minimum Upload Bandwidth Needed |
853x480 | 2mbps |
1280x720 | 5mbps |
1920x1080 | 10mbps |
2560x1440 | 16mbps |
3840x2160 (4K) | 30mbps |
i doas there stats state for internet speed, its important, your upload speed needs to be 5-10 min for 720/1080. Use to have max 1 up, which was fine for everything i ever needed, but streaming not so good LOL
Resolution Minimum Upload Bandwidth Needed 853x480 2mbps 1280x720 5mbps 1920x1080 10mbps 2560x1440 16mbps 3840x2160 (4K) 30mbps
1280x720 | 5mbps |
oh your 720 & 3000-5000 bitrate & chaturbates giving you warnings, i would ignore it, or fine tune your OBS video settings, this has been talked about on this forum, search for it, or google obs strean tweaking.i do
1280x720 5mbps
i should be able to do 2560X1440 because i get a little over 16mps
its in polish ,but should be in the same place, at the top , u should see"Tools": click it and u see many options: first should be automatic configuration creator or something like that. Its asking you first if for streaming/recording and u need go few steps so if u will have question, just ask.Where is option automatic configuration creator in OBS?
its in polish ,but should be in the same place, at the top , u should see"Tools": click it and u see many options: first should be automatic configuration creator or something like that. Its asking you first if for streaming/recording and u need go few steps so if u will have question, just ask.
Which encoder its recommending?i did test and its saying 10000 for video bitrate is that going to be good enough ?
And which encoders you have option to choose? One is always x264 and second (depends on your computer) Nvenc or something,just the other one, as i rememebr -and the other (not x264 is always showing 10 000 ),is worse quality than x264 but better for CPU. Generally which quality u wanna stream ?HD or HD+?Which encoder its recommending?
If you are only streaming in 720p you can drop it to 4000-5000. You won't get much benefit going higher than that.i did test and its saying 10000 for video bitrate is that going to be good enough ?
Nvenc i think is always showing 10 000 ,is hardware encoder, but when you go through steps of configuration, you should see option to choose nvenc or x264 , can you make test also or secnd one?this is the resalts from the test . I am hopping using these setting wont set off warning on CB because every setting i try gives me warring's in about 2 hours or so .
Hmm is software, should be option to choose software and hardware. Im almost sure there must be. Im annoying hah but try once againI don't remember seeing the option to do nvenc or x264 in the test
Okey ,otherway: when you go to settings , output. where u choose presets and encoder, u can choose x264 or only Nvenc? If there is x264 too, then must be also in configurationI don't remember seeing the option to do nvenc or x264 in the test
Yup but point is if he has x264 because for straming quality is waaaaaaaaaaay better. Im again nerding too muchI would stop focusing on chaturbates warnings and more what your stream is like to others.
And advanced settings and manually change things over auto settings.
1080p @60fps 10,000 bitrate seems high
1080 @30 & 5000 bitrate should be good
Just change the step when you choose software or hardware and choose software and see what it will show youSo changes some of the settings that automatic configuration creator gave me?
Never compared x264 to nvenc myself, but might on weekend to see if any difference.Yup but point is if he has x264 because for straming quality is waaaaaaaaaaay better. Im again nerding too much