While I'm not a mechanic I know a lot about cars and how to keep them properly maintained and running for as little $ as possible.
If anyone needs advice about their car, help choosing a mechanic, etc. let me know. Just had new front brake pads and rotors done. I like to/ and my mechanic doesn't care if I source my own parts. That way I know exactly what parts are being used and get them for the best price (Pads=Akebono Euros, Rotors=Meyle coated). If you know a part # Amazon.com turns out to be the cheapest.
Off to do this now: All brake pads must be bedded-in with the rotor they will be used against to maximize brake performance. The bedding-in process involves a gradual build up of heat in the rotors and pad compound. This process will lay down a thin layer of transfer film on to the rotor surface. Following the bed-in procedures provided by the manufacturer will assure a smooth, even layer of transfer film on the rotor and will minimize brake judder. Here are a few things to keep in mind when installing new rotors and pads:
http://www.tirerack.com/brakes/tech/tec ... ?techid=85
If anyone needs advice about their car, help choosing a mechanic, etc. let me know. Just had new front brake pads and rotors done. I like to/ and my mechanic doesn't care if I source my own parts. That way I know exactly what parts are being used and get them for the best price (Pads=Akebono Euros, Rotors=Meyle coated). If you know a part # Amazon.com turns out to be the cheapest.
Off to do this now: All brake pads must be bedded-in with the rotor they will be used against to maximize brake performance. The bedding-in process involves a gradual build up of heat in the rotors and pad compound. This process will lay down a thin layer of transfer film on to the rotor surface. Following the bed-in procedures provided by the manufacturer will assure a smooth, even layer of transfer film on the rotor and will minimize brake judder. Here are a few things to keep in mind when installing new rotors and pads:
http://www.tirerack.com/brakes/tech/tec ... ?techid=85